KAPILA brand grandly launched the upgraded version K5 brand new pure titanium tent stove

See the introduction below:

K5 is the first-generation pure titanium fully foldable tent stove launched by KAPILA brand in February 2021. The material is GR1, the wall thickness is 1.0, the overall structure is compact, and it is easy to fold. Realize cooking. Currently tested. It takes 12-15 minutes for a 1L kettle to boil.

The K5 2022 model is the latest second-generation pure titanium full-folding real fire tent stove launched by the KAPILA brand in May 2022.

Compared with the 2020 model, the product has 5 major upgrade highlights:

1. Chimney hoop upgrade

2. The flame-pressed sheet is added to the pure titanium top cover. The left side of the picture below is the new top cover, and the right side is the old top cover.

The principle comes from the design of the traditional fireplace cavity (manually guide the flame through the channel to delay the decay time of the flame, so that more energy is retained in the furnace body, saving energy and increasing the overall temperature in the tent.

3. Fold the titanium side plate to add a guard plate to create a secondary combustion space.

The hot air enters the guard plate from the outer hole. After preheating, the hot air sucked out into the furnace will be immediately ignited by the flame

4. The thermal conductivity of titanium is small, only 1/5 of steel, 1/13 of aluminum, and 1/25 of copper.

Our dear old customers are very satisfied with the deformation and corrosion resistance of the titanium furnace, but the titanium furnace may have some criticisms about the speed of heating food. To solve this problem,

KAPILA spent a lot of money to optimize and test the process, and developed the opening cover plate. Through special stretching, the top cover was strengthened, so that the top cover was not easily deformed.

This design opens the precedent for open flame heating in the titanium folding furnace product industry. Revolutionary upgrade: the heating efficiency is increased by 25--30%. After a lot of time tests, the top cover has been tested for 300 hours after 2 reinforcing strips and openings, and the deformation is basically negligible.

5. In order to improve the heating furnace of the furnace body and the problem of isolating the deformation of the bottom plate, we have upgraded the design of the charcoal bed

The stainless steel 430 material is more heat-resistant, and there are air intake holes arranged at three corners in the middle, which concentrates the flame to the center of the furnace cover to heat the pot. Make overall heating delivery faster. The front end of this charcoal bed is supported by 2 screws, which is convenient for flat storage and carrying after disassembly. It is also very convenient to use: